How to remove Play-Doh from Brick
First 60 seconds
The first sixty seconds decide how this turns out. Scrape away the excess play-doh from the brick, lifting solids off the surface without pressing them further in. A salt-and-flour dough that is far easier to brush away once fully dried than while still soft, and a fired clay material porous enough to pull stains in deep if they are left to soak.
What you'll need
- Patience
- A stiff, dry brush
- Dish soap
Step by step
- Gather your materials before you start — set out everything so you are not searching mid-treatment.
- Patience: let it dry completely before touching it at all.
- A stiff, dry brush: brush off once fully dry, not while damp.
- Dish soap: mix a few drops with cold water into a light suds.
- Rinse and blot dry with a clean cloth, then press with dry towels and change them until no more transfers onto the towel.
Do not do this
- Wiping while still wet. It grinds the particles further into the fibers.
- Working wet mud. Wait for it to dry — wet mud only smears.
Common questions
Can I use hot water to remove play-doh from brick?
Hot water is not usually necessary, but on brick it is safer to stay with cool water regardless, since a fired clay material porous enough to pull stains in deep if they are left to soak.
Is it safe to scrub the stain out?
Scrubbing usually makes things worse. Blot or lift instead of rubbing, working from the outer edge inward so the stain does not spread.
What if the play-doh stain has already dried?
A dried stain takes longer and may need repeated treatments, but the same agents still work — just re-wet the area gently first to reactivate the stain before treating it.