How to remove Hard Water Stains from Unglazed Terracotta
First 60 seconds
The first sixty seconds decide how this turns out. Scrape away the excess hard water stains from the unglazed terracotta, lifting solids off the surface without pressing them further in. Mineral deposits left behind as water evaporates, which only an acid rinse will dissolve, and unlike glazed tile, the bare clay surface here is highly absorbent and marks easily.
What you'll need
- White vinegar
- Lemon juice
- Baking soda
Step by step
- Test first: dab your chosen agent on a hidden corner of the unglazed terracotta and wait 2–3 minutes to confirm no discoloration.
- White vinegar: mix one part vinegar with two parts water.
- Lemon juice: apply directly and let it sit in sunlight for a natural bleaching action.
- Baking soda: make a paste with water and let it sit before brushing off.
- Rinse and blot dry with a clean cloth, then press with dry towels and change them until no more transfers onto the towel.
Do not do this
- Chlorine bleach. It can react with the stain or the material and cause discoloration.
- Ammonia-based cleaners. Mixed with certain stains it can release harsh fumes or set protein.
Common questions
Can I use hot water to remove hard water stains from unglazed terracotta?
Hot water is not usually necessary, but on unglazed terracotta it is safer to stay with cool water regardless, since unlike glazed tile, the bare clay surface here is highly absorbent and marks easily.
Is it safe to scrub the stain out?
Scrubbing usually makes things worse. Blot or lift instead of rubbing, working from the outer edge inward so the stain does not spread.
What if the hard water stains stain has already dried?
A dried stain takes longer and may need repeated treatments, but the same agents still work — just re-wet the area gently first to reactivate the stain before treating it.