How to remove Spray Paint from Acrylic Fabric
First 60 seconds
Move fast, but move carefully. Blot — do not wipe the spray paint from the acrylic fabric, working from the outside edge of the stain inward so it cannot spread any further. A fast-curing solvent-based paint that water alone cannot touch once it starts to dry, and a synthetic wool substitute that resists staining but can pill or glaze under too much heat.
What you'll need
- Acetone (pure nail polish remover)
- WD-40 or a similar lubricant
- Dish soap
Step by step
- Gather your materials before you start — set out everything so you are not searching mid-treatment.
- Acetone (pure nail polish remover): apply sparingly on a cotton pad, patch test first.
- WD-40 or a similar lubricant: spray lightly, wait a minute, then wipe from the outside in.
- Dish soap: mix a few drops with cold water into a light suds.
- Wipe clean with a damp cloth and dry the surface fully so no residue film is left behind.
Do not do this
- Water on its own. This stain is not water-soluble and will just smear.
- Letting it fully cure. Once cured this becomes a solvent-only, often professional job.
- Any heat source (iron, hair dryer, tumble dryer). Heat on acrylic fabric can bond the stain permanently or warp the material.
Common questions
Can I use hot water to remove spray paint from acrylic fabric?
Hot water is not usually necessary, but on acrylic fabric it is safer to stay with cool water regardless, since a synthetic wool substitute that resists staining but can pill or glaze under too much heat.
Is it safe to scrub the stain out?
Scrubbing usually makes things worse. Blot or lift instead of rubbing, working from the outer edge inward so the stain does not spread.
What if the spray paint stain has already dried?
A dried stain takes longer and may need repeated treatments, but the same agents still work — just re-wet the area gently first to reactivate the stain before treating it.