How to remove Soap Scum from Laminate Flooring
First 60 seconds
Do not reach for a rag and start scrubbing yet. Scrape away the excess soap scum from the laminate flooring, lifting solids off the surface without pressing them further in. A build-up of soap residue and hard-water minerals that layers thicker the longer it is left, and a plastic wear-layer over particleboard that swells if water seeps into the seams.
What you'll need
- White vinegar
- Baking soda
- Dish soap
Step by step
- Gather your materials before you start — set out everything so you are not searching mid-treatment.
- White vinegar: mix one part vinegar with two parts water.
- Baking soda: make a paste with water and let it sit before brushing off.
- Dish soap: mix a few drops with cold water into a light suds.
- Wipe clean with a damp cloth and dry the surface fully so no residue film is left behind.
Do not do this
- Chlorine bleach. It can react with the stain or the material and cause discoloration.
- Ammonia-based cleaners. Mixed with certain stains it can release harsh fumes or set protein.
- Any heat source (iron, hair dryer, tumble dryer). Heat on laminate flooring can bond the stain permanently or warp the material.
Common questions
Can I use hot water to remove soap scum from laminate flooring?
Hot water is not usually necessary, but on laminate flooring it is safer to stay with cool water regardless, since a plastic wear-layer over particleboard that swells if water seeps into the seams.
Is it safe to scrub the stain out?
Scrubbing usually makes things worse. Blot or lift instead of rubbing, working from the outer edge inward so the stain does not spread.
What if the soap scum stain has already dried?
A dried stain takes longer and may need repeated treatments, but the same agents still work — just re-wet the area gently first to reactivate the stain before treating it.