How to remove Gasoline from Mattress
First 60 seconds
Move fast, but move carefully. Blot — do not wipe the gasoline from the mattress, working from the outside edge of the stain inward so it cannot spread any further. Evaporates faster than diesel but still needs an absorbent powder to pull the residue out first, and foam and padding absorb liquid deep and dry slowly, so over-wetting risks mold.
What you'll need
- Cornstarch or talcum powder
- Dish soap
- WD-40 or a similar lubricant
Step by step
- Test first: dab your chosen agent on a hidden corner of the mattress and wait 2–3 minutes to confirm no discoloration.
- Cornstarch or talcum powder: bury the spot in powder to pull the oil out.
- Dish soap: mix a few drops with cold water into a light suds.
- WD-40 or a similar lubricant: spray lightly, wait a minute, then wipe from the outside in.
- Rinse and blot dry with a clean cloth, then press with dry towels and change them until no more transfers onto the towel.
Do not do this
- Hot water as a first step. It spreads oil-based stains before they can be lifted.
- Wiping side to side. It spreads the stain into a wider area — blot straight down instead.
- Any heat source (iron, hair dryer, tumble dryer). Heat on mattress can bond the stain permanently or warp the material.
Common questions
Can I use hot water to remove gasoline from mattress?
Hot water is not usually necessary, but on mattress it is safer to stay with cool water regardless, since foam and padding absorb liquid deep and dry slowly, so over-wetting risks mold.
Is it safe to scrub the stain out?
Scrubbing usually makes things worse. Blot or lift instead of rubbing, working from the outer edge inward so the stain does not spread.
What if the gasoline stain has already dried?
A dried stain takes longer and may need repeated treatments, but the same agents still work — just re-wet the area gently first to reactivate the stain before treating it.